VIT 122 - Vertical Lab Padder

Lab Padder, padding mangle is used for dyeing, finishing and impregnating.
The roller of Lab padder is made of quality NBR; good flexibility ensures long-life; whole machine is made of high quality stainless steel.

Power / Air
220 V 50Hz

165 Kg

850 x 740 x 1430 mm (L x W x H)

Test procedure:

  1. Cleaning the laboratory padder before use.
  2. Turn on the power.
  3. We press the button of starter motor, rotated direction and pressurizer. After that, the roller needs to be rotated the right direction.
  4. Pulling the pressure regulating valve outward lightly to adjust it. The clockwise direction is pressure increase, and the anti-clockwise direction is pressure reduction.
  5. Four operations include dipping, roll compacting, weight and calculation of liquor retention should be repeated until the pick-up is suitable for the test requirement.
  6. If necessary, we can pad the fabric after we use a small number of liquid rush through the roller.
  7. When the test is complete, we need to clean the compression roller, press the button to rotate the direction of the roller and stop the motor and turn off the power.
  • Working Width: 420mm
  • The Dia. of Roller: Φ130mm
  • Shore hardness: 70o
  • Working Speed: 0-30rpm (Adjustable)
  • Pressure of air: 0.1~0.6MPa
  • Padding Rate: 40%~80%